(888) 848-4842
info@metsamachines.com

Rammy ATV Snowblower 140

$5,299.00$5,899.00

The Rammy ATV Snowblower 140 allows you to easily clear snow on any surface, from pavement to gravel, or even grass areas. As a single stage snowblower, the Rammy snowblower is compact and allows your ATV to remain agile, even while blowing snow. This Rammy snowblower model uses the 140 wing set on the ATV snowblower 120, which gives it a clearing width of 55 inches.

Read More

Made in Finland

Made in Finland

Quick Facts

Clearing Width:

55 inches

Snow Clearing Height Max:

21.5 inches

Chute Rotation Control:

Electric Controlled

Deflector Angle Control:

Electronic Controller

ATV Requirements:

Winch and Universal Snowplow Mount Bracket

Warranty:

Two year

Brand:

Rammy

About the Rammy ATV Snowblower 140

General

The Rammy ATV Snowblower 140 allows you to easily clear snow on any surface, from pavement to gravel, or even grass areas. As a single stage snowblower, the Rammy snowblower is compact and allows your ATV to remain agile, even while blowing snow. This Rammy snowblower model uses the 140 wing set on the ATV snowblower 120, which gives it a clearing width of 55 inches.

The Rammy Snowblower 140 is well equipped with a Briggs & Stratton Professional series 306 cc gas engine and electric controls for chute rotation and deflector angle.

Due to its streamlined design, the Rammy can be installed or uninstalled in about 2 minutes (after the initial setup and mounting).

Start-Up/Electronics

The Rammy snowblower includes a control box that will mount to your ATV. However, the control box is only wired to the Rammy – no connections to your ATV are necessary. The control box houses the switches to control chute rotation and deflector angle, as well as an engine kill switch.

This snowblower comes with 120 volt electric start standard, as well as recoil pull start. Watch our video on how to start the Rammy HERE.

Engine/Clearing Options

As previously mentioned, the Rammy ATV Snowblower 140 is powered by a Briggs & Stratton Professional series 306 cc gas engine. However, it can be upgraded to a Briggs & Stratton Professional series 420 cc gas engine – this is the PRO version which is an additional $599.

This is the mid-tier configuration of the Rammy snowblower. It has a clearing width of 55 inches, while the base model snowblower 120 has a clearing width of 47.25 inches. We also offer a 155 wing set, which increases the clearing width to 61 inches.

It is always possible to add or remove a wing set if you decide you want to change your configuration. However, we strongly recommend using the 420 cc engine with both the 140 and 155 wing sets.

As a side note, the 155 wing set does not work well with the 306 cc engine. If you think you might want to upgrade in the future, then you will want the 420 cc engine.

Mounting

The Rammy snowblower mounts with your existing center mount snowplow brackets. However, your ATV needs a winch to raise and lower the snowblower between mowing and transport positions. We also recommend using about 100 lb of ballast weight on the rear rack of your ATV. This will help offset the added weight of the Rammy.

Additionally, you can tighten your front springs (if adjustable) and adjust your front tire pressures to help alleviate the extra weight on the suspension. If your ATV has a soft front suspension, it would benefit from having heavy duty springs or spring inserts installed.

One thing to note is that the weight is only on the suspension in transport position. When blowing snow, the weight of the Rammy is on the ground via its adjustable skid shoes.

If you’d like to learn more about Rammy, you can visit their site here.

 

More Videos

Reviews

There are no reviews yet.

Be the first to review “Rammy ATV Snowblower 140”

Your email address will not be published.

Interested in a Rammy?

Click the button below to browse our dealer locations.

No dealer near you? Contact us using the form below, we can ship anywhere in the USA via LTL freight.

Dealers

Get a Quote

Go to Top