(888) 848-4842
info@metsamachines.com

Rammy Snowblower 120, 140, 155

$4,899.00$5,999.00

The 306 cc Engine is NOT RECOMMENDED for the 155

The Rammy ATV/UTV Snowblower allows you to easily clear snow on any surface, from pavement to gravel, or even grass areas. As a single stage snowblower, the Rammy snowblower is compact and allows your UTV/ATV to remain agile, even while blowing snow. The Rammy 120 is the base model, which can be upgrade with the 140 or 155 wing sets. These increase the clearing width of the snowblower.

Likewise, you can upgrade to the Pro Engine, which is a 420 cc Briggs & Stratton engine. For the 155 wing set, we strongly recommend upgrading the engine.

Read More

Made in Finland

Made in Finland

Quick Facts

Clearing Width:

47.25 in | 55 in | 61 in

Snow Clearing Height Max:

21.5 in

Chute Rotation Control:

Electronic Controller

Deflector Angle Control:

Electronic Controller

ATV Requirements:

Winch and Universal Snowplow Mount Bracket

Warranty:

Two year

Brand:

Rammy

About the Rammy Snowblower 120, 140, 155

General

The Rammy ATV Snowblower allows you to easily clear snow on any surface, from pavement to gravel, or even grass areas. As a single stage snowblower, the Rammy snowblower is compact and allows your ATV to remain agile, even while blowing snow.

Each snowblower has electric controls for chute rotation and deflector angle.

Due to its streamlined design, the Rammy can be installed or uninstalled in about 2 minutes (after the initial setup and mounting).

Start-Up/Electronics

The Rammy snowblower includes a control box that will mount to your ATV. However, the control box is only wired to the Rammy – no connections to your ATV are necessary. The control box houses the switches to control chute rotation and deflector angle, as well as an engine kill switch.

This snowblower comes with 120 volt electric start standard, as well as recoil pull start. Watch our video on how to start the Rammy HERE.

Engine/Clearing Options

Two wings sets are available to upgrade the snow clearing capacity. The 140 wing set increases the clearing width from 47.25 inches (120 cm), to 55 inches (140 cm). The 155 wing set upgrades its clearing width to 61 inches (155 cm).

The Rammy ATV Snowblower can either be powered by a Briggs & Stratton Professional series 306 cc gas engine, or it can be upgraded to a Briggs & Stratton Professional series 420 cc gas engine—this is the PRO version which is an additional $599.

We strongly recommend the 420 cc engine for both the 140 and 155. In fact, we do not recommend using the 306 cc engine with the 155 wing set because it will struggle to keep up.

Mounting

The Rammy snowblower mounts with your existing center mount snowplow brackets. However, your ATV needs a winch to raise and lower the snowblower between mowing and transport positions. We also recommend using about 100 lb (45.36 kg) of ballast weight on the rear rack of your ATV. This will help offset the added weight of the Rammy.

Additionally, you can tighten your front springs (if adjustable) and adjust your front tire pressures to help alleviate the extra weight on the suspension. If your ATV has a soft front suspension, it would benefit from having heavy duty springs or spring inserts installed.

One thing to note is that the weight is only on the suspension in transport position. When blowing snow, the weight of the Rammy is on the ground via its adjustable skid shoes.

If you’d like to learn more about Rammy, you can visit their site here.

More Videos

Rammy Snowblower 120, 140, 155 Rating

Reviews

There are no reviews yet.

Be the first to review “Rammy Snowblower 120, 140, 155”

Your email address will not be published. Required fields are marked *

Interested in a Rammy?

Click the button below to browse our dealer locations.

No dealer near you? Contact us using the form below, we can ship anywhere in the USA via LTL freight.

Dealers

Get a Quote

Go to Top